This story ran this week on our main site--http://www.renewablenow.biz/renewable-science.html. Once you finish here, click over to our site and enjoy much more on the business side of green. We'd love to hear from you if you are a smoker as well.
We've seen and read a lot about R & D on supercapacitors. We know a group in Texas has made great progress in trying to bring them to the commercial market. Stay tuned.
For those of use who have walked along a beautiful beach and enjoyed the warm water upon our feet only to have the moment utterly destroyed when we come upon a slew of cigarette butts in our path there may be some good news in possibly curbing such horrible pollution. News out of Seoul Korea just may make cigarette butts a commodity in helping build, of all things, electric cars!
SEOUL, South Korea, August 6, 2014 (ENS) – How can used cigarette butts contribute to the development of superior electric vehicles? South Korean researchers have found a way.
Five scientists from Seoul National University’s College of Engineering have converted used cigarette filters into a high-performing material for supercapacitors that could be integrated into electric vehicles to store energy.
Unlike batteries that offer limited charging/discharging rates, supercapacitors require only seconds to charge and can feed electricity back into the vehicle’s air-conditioning system, GPS, radio, and other devices as needed.
Publishing their findings August 5 in the Institute of Physics Publishing’s journal “Nanotechnology,” the scientists say they have demonstrated the material’s superior performance compared to commercially available carbon, graphene and carbon nanotubes.
cigarette butts
They hope the material derived from cigarette butts can be used to coat the electrodes of supercapacitors – electrochemical components that can store large amounts of electrical energy – while also offering a solution to the growing environmental problem caused by trillions of used cigarettes filters discarded annually.
It is estimated that as many as 5.6 trillion used-cigarettes, or 766,571 metric tons, are deposited into the environment worldwide every year.
Study co-author Professor Jongheop Yi said, “Our study has shown that used cigarette filters can be transformed into a high-performing carbon-based material using a simple one step process, which simultaneously offers a green solution to meeting the energy demands of society.”
“Numerous countries are developing strict regulations to avoid the trillions of toxic and non-biodegradable used-cigarette filters that are disposed of into the environment each year,” said Yi. “Our method is just one way of achieving this.”
Scientists around the world are currently working towards improving the characteristics of supercapacitors, such as energy density, power density and cycle stability, while reducing production costs.
As compared to the basic electrostatic capacitor used to tune radio frequencies, the supercapacitor is ideal for energy storage that undergoes frequent charge and discharge cycles at high current and short duration.
Carbon is the most popular material that supercapacitors are made of, due to its low cost, high surface area, high electrical conductivity and long-term stability.
In their study, the Seoul researchers demonstrated that the cellulose acetate fibers of which cigarette filters are made could be transformed into a carbon-based material using a simple, one-step burning technique called pyrolysis, conducted in a nitrogen-rich environment.
Used cigarette filters from Marlboro Light Gold, Bohem Cigar Mojito and The One Orange from the Korea Tobacco & Ginseng Corp. were collected.
They were pyrolyzed for two hours in an atmosphere of argon and NH3, a colorless, pungent gas composed of nitrogen and hydrogen.
The carbon-based material resulting from this burning process contained both tiny nano-pores and medium-sized nano-pores, increasing its performance as a supercapacitive material.
“A high-performing supercapacitor material should have a large surface area, which can be achieved by incorporating a large number of small pores into the material,” said Professor Yi.
The porous carbon material developed by Yi and his colleagues spontaneously contains both micropores, with pore diameters of less than two nanometers, and mesopores, with pore diameters of about 25 nanometers.
“The unique self-developed pore structure allowed a favorable pathway for electrolyte permeation and contact probability, resulting in the extended rate capability for the supercapacitor, said Yi.
“A combination of different pore sizes ensures that the material has high power densities, which is an essential property in a supercapacitor for the fast charging and discharging,” he said.
Once fabricated, the carbon-based material was attached to an electrode and tested in a three-electrode system to see how well the material could charge and discharge.
The material stored a higher amount of electrical energy than commercially available carbon, the researchers found. It also had a higher storage capacity compared to the graphene and carbon nanotubes reported in previous studies.
SEOUL, South Korea, August 6, 2014 (ENS) – How can used cigarette butts contribute to the development of superior electric vehicles? South Korean researchers have found a way.
Five scientists from Seoul National University’s College of Engineering have converted used cigarette filters into a high-performing material for supercapacitors that could be integrated into electric vehicles to store energy.
Unlike batteries that offer limited charging/discharging rates, supercapacitors require only seconds to charge and can feed electricity back into the vehicle’s air-conditioning system, GPS, radio, and other devices as needed.
Publishing their findings August 5 in the Institute of Physics Publishing’s journal “Nanotechnology,” the scientists say they have demonstrated the material’s superior performance compared to commercially available carbon, graphene and carbon nanotubes.
cigarette butts
They hope the material derived from cigarette butts can be used to coat the electrodes of supercapacitors – electrochemical components that can store large amounts of electrical energy – while also offering a solution to the growing environmental problem caused by trillions of used cigarettes filters discarded annually.It is estimated that as many as 5.6 trillion used-cigarettes, or 766,571 metric tons, are deposited into the environment worldwide every year.
Study co-author Professor Jongheop Yi said, “Our study has shown that used cigarette filters can be transformed into a high-performing carbon-based material using a simple one step process, which simultaneously offers a green solution to meeting the energy demands of society.”
“Numerous countries are developing strict regulations to avoid the trillions of toxic and non-biodegradable used-cigarette filters that are disposed of into the environment each year,” said Yi. “Our method is just one way of achieving this.”
Scientists around the world are currently working towards improving the characteristics of supercapacitors, such as energy density, power density and cycle stability, while reducing production costs.
As compared to the basic electrostatic capacitor used to tune radio frequencies, the supercapacitor is ideal for energy storage that undergoes frequent charge and discharge cycles at high current and short duration.
Carbon is the most popular material that supercapacitors are made of, due to its low cost, high surface area, high electrical conductivity and long-term stability.
In their study, the Seoul researchers demonstrated that the cellulose acetate fibers of which cigarette filters are made could be transformed into a carbon-based material using a simple, one-step burning technique called pyrolysis, conducted in a nitrogen-rich environment.
Used cigarette filters from Marlboro Light Gold, Bohem Cigar Mojito and The One Orange from the Korea Tobacco & Ginseng Corp. were collected.
They were pyrolyzed for two hours in an atmosphere of argon and NH3, a colorless, pungent gas composed of nitrogen and hydrogen.
The carbon-based material resulting from this burning process contained both tiny nano-pores and medium-sized nano-pores, increasing its performance as a supercapacitive material.
“A high-performing supercapacitor material should have a large surface area, which can be achieved by incorporating a large number of small pores into the material,” said Professor Yi.
The porous carbon material developed by Yi and his colleagues spontaneously contains both micropores, with pore diameters of less than two nanometers, and mesopores, with pore diameters of about 25 nanometers.
“The unique self-developed pore structure allowed a favorable pathway for electrolyte permeation and contact probability, resulting in the extended rate capability for the supercapacitor, said Yi.
“A combination of different pore sizes ensures that the material has high power densities, which is an essential property in a supercapacitor for the fast charging and discharging,” he said.
Once fabricated, the carbon-based material was attached to an electrode and tested in a three-electrode system to see how well the material could charge and discharge.
The material stored a higher amount of electrical energy than commercially available carbon, the researchers found. It also had a higher storage capacity compared to the graphene and carbon nanotubes reported in previous studies.
No comments:
Post a Comment